NEC SL1000 - Page 450

No
No
No
No
Yes
Yes
Yes
B
In PRG 22-01-04,
enter 0.
Do not
reroute
Reroute
Do you want
unanswered PRI
calls to reroute if
unanswered?
In PRG 22-01-04,
enter 0.
In PRG 22-08-01,
enter the no-answer
Ring Group for
unanswerd PRI
calls.
In PRG 22-04-01,
assign extension
to PRI trunk's Ring No
Answer Ring Group.
For each extension in the
Ring Group, In PRG
22-06-01, enter '1' for each
time mode when the
extension should ring.
In PRG 22-01-02,
enter 0.
If a PRI call rings longer than
a specified interval, should
the ring cadence change to a
unique "alarm" sound?
In PRG 22-01-02,
Enter 1. Also, set the
interval in
PRG 22-01-03.
Do you want to
change the way
PRI calls ring
telephones?
Change the Ring Tone
Range in PRG 22-03-01
and PRG 15-02-02 the
tones within each range
in PRG 82-01-01 and
the ring cadence in
PRG 20-15-01.
Adjust the CODEC
Gain in PRG 14-01-02
(transmit) and PRG
14-01-03 (receive).
Trunks
Do you want to
adjust the gain
(volume) for trunks?
Consider using
Multiple Directory Numbers, or
Ring Groups for PRI trunks
instead of Direct Trunk
Appearance.
Do you want line
keys for incoming
PRI trunks?
In PRG 15-07-01, program
function keys and line keys
(*
01
), loop keys (*
05
)or
line group keys (*
02
).
Finished
SL1000/SL1100 ISSUE 2.0
1-440
ISDN Compatibility
I