In PRG 15-01-04,
enter 0 In PRG
10-03-05 enter 0
Should Caller ID be included
in the call's setup message?
In PRG 15-01-04,
enter 1 In PRG
10-03-05 enter 1.
In PRG 20-09-03, enter
0 to disable sub-address
display by Telco.
Should Telco display the
calling number's sub-address?
In PRG 20-09-03, enter
1 to enable sub-address
display by Telco.
In PRG 21-12-01, program the calling
party number data (16 digits max.)
for each trunk.
In PRG 20-06-01,
assign Class of Service
to extensions.
In PRG 21-13-01, program the calling
party number data (16 digits max.)
for each extension.
In PRG 14-01-07,
enter 0 to prevent
outgoing calls.
Are outgoing
calls allowed on
specific trunks?
In PRG 14-01-07,
enter 1 to allow
outgoing calls.
In PRG 14-05-01 assign PRI trunks to trunk groups
(This determines available channels for PRI trunks).
Do you need to restrict
certain extensions from
placing calls on certain
trunks?
In the default
program extensions
Build an out going
restriction matrix
In PRG 14-07-01
for each Access
Map, select the
access options
for each trunk.
In PRG 15-06-01,
assign extensions
to Access Maps.
If the system detects the called party is
busy, how long should the busy
tone be heard? (0-64800)
If a user preselects a line, how
long should the system
remember the preselection?
In PRG 20-02-06,
enter the preselection
interval.
Should caller hear DTMF
confirmation tones as they
are dialing a trunk call?
In PRG 14-01-10,
enter 0.
In PRG 14-01-10,
enter 1.
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Go To
B
A
To Next Page
Loading...
