System Availability
Terminals
Multiline Terminals
Required Component(s)
None
Related Features
Automatic Route Selection (ARS) / Central Office Calls, Answering / Central Office Calls,
Placing
Program incoming and outgoing access and routing options.
Off Hook Signaling
If enabled, a user hears Call Waiting beeps if additional calls are waiting behind a loop key.
Programmable Function Keys
If you have a line and loop key for the same trunk, the line key has precedence. An incoming call rings the
line key, not the loop key. When you press the loop key for an outgoing call, the line key lights.
Ring Groups
Trunks ring terminals according to their Ring Group assignments (PRG 22-04 and PRG 22-05).
Direct Inward Dialing (DID) / Direct Inward Line (DIL) / Direct Inward System Access (DISA)
Transferred DID, DIL and DISA calls do not require ring group programming.
Guide to Feature Programming
Program
Number
Program Name Default Note
14-05-01 Trunk Group - Trunk Group Number Trunk Port 1~126 = Priority 1~126 (SL1000)
Trunk Port 1~96 = Priority 1~96 (SL1100)
14-07-01 Trunk Access Map Setup Access Map 1 = Trunk Ports 1~126 assigned
with option 7 access (incoming and outgoing
access and access when trunk is on Hold).
(SL1000)
Access Map 2~126 = Trunk Ports 1~126 as-
signed with option 0 access (No access).
(SL1000)
Access Map 1 = Trunk Ports 1~96 assigned
with option 7 access (incoming and outgoing
access and access when trunk is on Hold).
(SL1100)
Access Map 2~96 = Trunk Ports 1~96 assigned
with option 0 access (No access). (SL1100)
15-06-01 Trunk Access Map for Extensions 1
15-07-01 Programmable Function Keys Refer to Programming Manual.
SL1000/SL1100 ISSUE 2.0
1-464
Loop Keys
L
To Next Page
Loading...
