Program
Number
Program Name Default Note
15-13-01 Loop Keys - Outgoing Option 0: Programming Function Key No. = 01-24
15-13-02 Loop Keys - Incoming Option 0: Programming Function Key No. = 01-24
20-07-10 Class of Service Options (Administra-
tor Level) - Programmable Function
Key Programming (Appearance Level) -
Hybrid Operation Key (loop keys) (
05)
COS 01~15 = 1
22-04-01 Incoming Extension Ring Group As-
signment
Extension 200 (first port)
22-05-01 Incoming Trunk Ring Group Assign-
ment
1
Operation
To place a call on a loop key:
1. Press outgoing or both ways loop key.
You hear dial tone and the key lights green.
2. Dial number.
To answer a call on a loop key:
Listen for ringing a look for a flashing loop key.
1. Press the loop key.
The key lights green and you connect to the call.
If there are additional calls waiting to be answered, your display shows: [WAITING - LOOP KEY]
To program a loop key:
1. Press the Speaker key.
2. Dial 852.
3. Press the key you want to program as a loop key.
4. Dial
05.
5. Dial the loop key type:
• 0 = Incoming only
• 1 = Outgoing only
• 2 = Both ways (incoming and outgoing)
6. Dial the loop key routing option for incoming, outgoing, or incoming and outgoing calls:
• 000 = Trunk Group Routing or ARS (if installed)
• 001~025 = Trunk Groups
If you selected option 2 in step 5 above, enter the incoming Trunk Group followed by the outgoing
Trunk Group.
7. Press Speaker key to hang up.
ISSUE 2.0
SL1000/SL1100
Features and Specifications Manual 1-465
L
To Next Page
Loading...
