NEC SL1000 - Page 485

Guide to Feature Programming
Program Num-
ber
Program Name Default
11-12-21 Service Code Setup (for Service Access) - Meet-Me
Answer to Specified Internal Paging Group
864
11-12-22 Service Code Setup (for Service Access) - Meet-Me
Answer to External Paging
865
11-12-23 Service Code Setup (for Service Access) - Meet-Me
Answer in Same Paging Group
863
15-07-01 Programmable Function Keys Refer to Programming Manual.
20-06-01 Class of Service for Extensions All extension port = Class 1
20-10-06 Class of Service Options (Answer Service) - Meet-Me
Conference and Paging
COS 01~15 = 1
31-02-01 Internal Paging Group Assignment - Internal Paging
Group Number
All Stations = 0
31-02-02 Internal Paging Group Assignment - Internal All Call
Paging Receiving
0
31-03-01 Internal Paging Group Settings - Internal Paging
Group Name
Refer to Programming Manual.
For additional programming information on Paging, refer to the Paging, External on page 1-537 and
Paging, Internal on page 1-542 features.
Operation
Meet Me External Paging Transfer
To make a Meet Me External Paging Transfer:
1. At the Multiline Terminal, while on a call, press Hold key.
- OR -
At the Single Line Terminal, while on a call, hookflash.
2. Dial Paging code [External 803 or Combined (
*
1)] and the Paging Zone.
3. Announce the call.
4. From a Multiline Terminal, when the paged party answers, press Transfer key or the Transfer
softkey.
- OR -
From a Single Line Terminal, when the paged party answers, hang up.
The party is transferred.
To join a Meet Me External Paging Transfer:
1. At the Multiline Terminal, press Speaker key or pick up handset.
- OR -
At Single Line Terminal, lift the handset.
2. Dial 865.
3. Dial the announced External Paging Zone (1~3).
The Paging party is connected.
ISSUE 2.0 SL1000/SL1100
Features and Specifications Manual 1-475
M