NEC SL1000 - Page 486

4. Stay on the line.
The party is transferred.
Meet Me Internal Paging Transfer
To make a Meet Me Internal Paging Transfer:
1. At Multiline Terminal, while on a call, press Hold key.
- OR -
At the Single Line Terminal, while on a call, hookflash.
2. Dial Paging code [Internal 801, External 803, or Combined (
*
1)] and the Paging Zone.
3. Announce the call.
4. From a Multiline Terminal, when the paged party answers, press Transfer key.
- OR -
From a Single Line Terminal, when the paged party answers, hang up.
The party is transferred.
To join a Meet Me Internal Paging Transfer:
1. At the Multiline Terminal, press Speaker key or pick up handset.
- OR -
At the Single Line Terminal, lift the handset.
2. Dial 863 (if your extension is in the zone called).
- OR -
Dial 864 and the zone number (if your extension is not in the zone called).
- OR -
Press the Meet Me Conference/Paging Pickup key (PRG 15-07 or SC 851: 23) if your extension
is in the zone called.
3. Stay on the line.
The party is transferred.
SL1000/SL1100 ISSUE 2.0
1-476
Meet Me Paging Transfer
M