MyCalls is also supported on Terminal Services and Hyper V running on a Windows 2008 server.
MyCalls clients have the same minimum specification as the MyCalls server above.
Default Settings
MyCalls not installed and SMDR not programmed.
For more information please refer to the MyCalls Installation Manual and MyCalls SL1100 End User
Manual
System Availability
Terminals
All Terminals
Required Components
VoIPDB
MyCall License: SL-DT-MYCALL-1 LIC
Related Features
Station Message Detail Recording
Guide to Feature Programming
The programs listed below indicate the most commonly used programs required for this feature. The
programs are listed in the order that the installer should follow. Refer to the PCPro wizards for further
detailed programming.
• When a * is listed next to the Program Number it indicates a program that MUST be set (from a
default state) for this feature to be enabled.
Program
Number
Program Name/Description Assigned Data
10-20-01 * TCP Port
Assign a valid TCP port to external device 5 (SMDR Output).
It is recommended to not use ports 1 ~ 1023.
0 ~ 65535
(default = 0)
14-01-06 SMDR Printout - Per Trunk
This option can include/exclude trunks from being reported in the
SMDR printout.
If a trunk is set to No Print Out (setting data of 0) any calls made or
received on this line will not be reported in the SMDR printout.
0 = No (trunk will not be reported in
the SMDR print out.)
1 = Yes (trunk will be reported in the
SMDR print out.)
(default = 1)
15-01-03 SMDR Printout - Per Station
This option can include/exclude stations from being reported in the
SMDR printout.
If a station is set to No Print Out (setting data of 0) any calls made or
received on this station will not be recorded in the SMDR printout.
0 = None (station will not be reported
in the SMDR print out.)
1 = Yes (station will be reported in the
SMDR print out.)
(default = 1)
ISSUE 2.0 SL1000/SL1100
Features and Specifications Manual 1-647
S
To Next Page
Loading...
