Program
Number
Program Name/Description Assigned Data
35-01-01 SMDR Output Port Type
This enables/disables the SMDR data from being sent out of the
SL1100.
0 = Not Set (SMDR disabled)
3 = LAN (SMDR enabled and sent out
of the LAN port.)
(default:
SMDR port1 = 3
SMDR port2 = 0)
35-01-04 Omit Digits
The number of digits entered in this option does not print on the
SMDR report. For example, if the entry is 10, the first 10 digits a user
dials do not appear on the SMDR report.
0 ~ 24 (0 = Not applied)
(default = 0)
35-01-05 Minimum Digits
Outgoing calls must be at least this number of digits for inclusion in
the SMDR report.
0 ~ 24 (0 = Not applied)
(default = 0)
35-01-06 Minimum Call Duration
The duration of the call must be at least this time to be included on the
SMDR report.
0 ~ 65535 seconds (0 = All)
(default= 0)
35-01-07 Minimum Ring Time (For Incoming Calls)
A call must ring for at least this time to be included on the SMDR re-
port.
0 ~ 65535 seconds (0 = All)
(default= 0)
35-01-08 * Format Selection
Need to be set to Overseas
0 = Format1 Type (North America)
1 = Format2 Type (Overseas)
(default = 0)
80-05-01 * Date Format
Needs to be set to European Format
0 = American Format (Month / Day /
Year)
1 = Japanese Format (Year / Month /
Day)
2 = European Format (Day / Month /
Year)
(default = 0)
10- 12-01 IP Address
Assign the IP Address for the CPU's NIC card.
If a VoIPDB is installed in the system it is recommended to set this to
0.0.0.0 and all connections to the system will be made through the
VoIPDB.
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.254.255.254
192.0.0.1 ~ 223.255.255.254
(default = 192.168.0.10)
10-12-02 Subnet Mask
Assign the subnet mask for the CPU's NIC card.
If a VoIPDB is installed in the system it is recommended to set PRG
10-12-01 to equal 0.0.0.0 and leave this program set to default.
Refer to the programming manual for
all the possible valid subnet mask en-
tries.
(default = 255.255.255.0)
10-12-03 Default Gateway
Assign the SL1100'sdefault gateway IP address.
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.254.255.254
192.0.0.1 ~ 223.255.255.254
(default = 0.0.0.0)
10-12-09 VoIPDB IP Address
Assign the IP Address for the VoIPDB.
If a VoIPDB is installed in the system it is recommended to set PRG
10-12-01 to 0.0.0.0 and all connections to the system will be made
through the VoIPDB.
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.254.255.254
192.0.0.1 ~ 223.255.255.254
(default = 172.16.0.10)
10-12-10 VoIPDB Subnet Mask
Assign the subnet mask for the VoIPDB card.
Refer to the programming manual for
all the possible valid subnet mask en-
tries.
(default = 255.255.0.0)
35-02-01 Toll Restricted Call
SMDR can include or exclude calls blocked by Toll Restriction.
0 = Not Displayed
1 = Displayed
(default = 1)
35-02-02 PBX Calls
When the system is behind a PBX, SMDR can include all calls (1) or
just calls dialed using the PBX trunk access code (0).
0 = Not Displayed
1 = Displayed
(default = 1)
35-02-03 Trunk Number or Name
Select whether the system should display the trunk name (0) or the
number (1) on SMDR reports.
0 = Name
1 = Number
(default = 1)
SL1000/SL1100 ISSUE 2.0
1-648
SL1100 MyCalls (SL1100)
S
To Next Page
Loading...
