Program
Number
Program Name/Description Assigned Data
35-02-04 * Summary (Daily)
Set this option to (1) to have the SMDR report provides a daily sum-
mary (at midnight every night).
Needs to be set to Not Displayed.
0 = Not Displayed
1 = Displayed
(default = 1)
35-02-05 * Summary (Weekly)
Set this option to (1) to have the SMDR report provides a weekly sum-
mary (every Saturday at midnight).
Needs to be set to Not Displayed.
0 = Not Displayed
1 = Displayed
(default = 1)
35-02-06 * Summary (Monthly)
Set this option to (1) to have the SMDR report provides a monthly
summary (at midnight on the last day of the month).
Needs to be set to Not Displayed.
0 = Not Displayed
1 = Displayed
(default = 1)
35-02-07 * Toll Charge Cost
Set this option to (1) have the SMDR report include toll charges.
Needs to be set to Not Displayed.
0 = Not Displayed
1 = Displayed
(default = 1)
35-02-08 Incoming Call
Enable this option (1) to have the SMDR report include incoming calls.
If you disable this option (0), incoming calls do not print.
0 = Not Displayed
1 = Displayed
(default = 1)
35-02-09 Extension Number or Name
Set this option (1) to have the SMDR report include extension num-
bers. Set this option (0) to have the SMDR report include extension
names.
0 = Name
1 = Number
(default = 1)
35-02-10 All Lines Busy (ALB) Output
Determine if the All Lines Busy (ALB) indication should be displayed.
0 = Not Displayed
1 = Displayed
(default = 0)
35-02-11 Walking Toll Restriction Table Number 0 = Not Output
1 = Output
(default = 1)
35-02-12 DID Table Name Output
Determine if the DID table name should be displayed.
0 = Not Displayed
1 = Displayed
(default = 0)
35-02-13 CLI Output When DID to Trunk
Determine if the CLI output should be displayed for DID.
0 = Not Displayed
1 = Displayed
(default = 0)
35-02-14 Date
Determine whether or not the date should be displayed on SMDR re-
ports.
0 = Not Displayed
1 = Displayed
(default = 0)
35-02-15 CLI/DID Number Switching
Determine whether or not the CLI/DID Number Switching should be
displayed.
0 = CLI (CLIP)
1 = DID Calling Number
2 = Calling Party Name
(default = 0)
35-02-16 * Trunk Name or Received Dialed Number
Determine how the SMDR should print incoming calls on ANI/DNIS or
DID trunks. If set to (1), ANI/DNIS trunks can print DNIS digits. If set
to (0) trunk names are printed instead.
Needs to be set to Both.
0 = Trunk Port Name
1 = Received Dialed Number
2 = Both
(default = 0)
35-02-17 Print Account Code or Caller Name of Incoming Call
Determine if SMDR should print Account Code or Caller Name of In-
coming Call.
0 = ACC
1 = CNAME
(default = 0)
35-02-18 Print Mode for Caller Name of Incoming Call
Determine how SMDR should print Caller Name of Incoming Call.
0 = Normal
1 = Line Feed
(default = 0)
35-02-19 Dialed Number Output Format
Determine if the dialed number should display from the first digits or
from the last digits. This option is only available for outgoing calls.
0 = Display from the first digit
1 = Display from the last digit
(default = 0)
ISSUE 2.0 SL1000/SL1100
Features and Specifications Manual 1-649
S
To Next Page
Loading...
