Program Num-
ber
Program Name Default
24-02-07 System Options for Transfer - Trunk-to-Trunk
Transfer Release Warning Tone
1800 (seconds)
24-02-10 System Options for Transfer - Disconnect
Trunk-to-Trunk
0 (seconds)
24-04-01 Automatic Trunk-to-Trunk Transfer Target Set-
up
999
25-07-07 System Timers for VRS/DISA - Long Conversa-
tion Warning Tone Time
30 (seconds)
25-07-08 System Timers for VRS/DISA - Long Conversa-
tion Disconnect Time
15 (seconds)
Trunk Disconnect Continue/Disconnect Codes
Program
Number
Program Name Default
14-01-25 Basic Trunk Data Setup - Continued/Discontinued
Trunk-to-Trunk Conversation
0
20-28-01 Trunk to Trunk Conversation - Conversation Continue
Code
not assigned
20-28-02 Trunk to Trunk Conversation - Conversation Discon-
nect Code
not assigned
20-28-03 Trunk to Trunk Conversation - Conversation Continue
Time
0 (seconds)
24-02-07 System Options for Transfer - Trunk-to-Trunk Transfer
Release Warning Tone
1800 (seconds)
24-02-10 System Options for Transfer - Disconnect Trunk-to-
Trunk
0 (seconds)
25-07-07 System Timers for VRS/DISA - Long Conversation
Warning Tone Time
30 (seconds)
25-07-08 System Timers for VRS/DISA - Long Conversation Dis-
connect Time
15 (seconds)
80-01-02 (35) Service Tone Setup - Basic Tone Number 0~33
0 = No Tone
33 = Default Time Slot
Operation
Method A - Tandem Trunking from Conference
To set up a Tandem Call:
1. Place or answer first trunk call.
2. Press the Conf softkey or DND/CONF key. (SL1000) Press the Conf softkey. (SL1100)
3. Place or answer second trunk call.
4. To set up the tandem call, press the Conf softkey or DND/CONF key twice (SL1000) the Conf
softkey (SL1100).
This sets up a Conference between you and both outside parties.
ISSUE 2.0 SL1000/SL1100
Features and Specifications Manual 1-683
T
To Next Page
Loading...
