NEC SL1000 - Page 801

To program a key, press Speaker key, dial 851 (for 2-digit codes) or 852 (for 3-digit codes), press the key
and enter the code (e.g., 48 for Voice Over).
Use this key... For this feature... When you ... Key Lamp Status Also see Srvc
Code
Note
Code: 94 + Call
Attendant key
Operation: Press
key
Call Attendant Use Call Attendant Fast flash when setup
for No answer calls.
Twice blink when set-
up for Busy calls.
On when setup for
Busy/No answer calls.
Busy:796
No Answer:797
Code: 97 + Door-
phone 1 ~ 8
(SL1000) 1 ~ 6
(SL1100)
Operation: Press
key
Doorphone Use Doorphone ac-
cess
On when Doorphone
Busy.
Fast flash when Door-
phone Incoming.
802
Code: #02 + pack-
age 1 ~ 16
(SL1000) 1 ~ 9
(SL1100) to cut
the telephone
power.
Operation: Press
key
Ecology Set telephone pow-
er cut.
On when set. 831
Code: #03 + Re-
mote Monitor Per-
mit key
Operation: Press
key
Security Set Remote Moni-
tor.
Slow flash when set
Remote Monitor
710
Code:
*
01 +
Trunk number
(001~126
(SL1000) 001~096
(SL1100))
Operation: Press
key
Central Office Calls Press a line key to
place or answer a
trunk call (where
trunks are 001~126
(SL1000) 001~096
(SL1100)).
On green when
seized, on red when in
use (by other party),
Slow Flash green
when ringing, Hold
flash when on Hold
#0
Code:
*
02 + TRK
group (1~9 or
001~126 (SL1000)
001~096
(SL1100))
Operation: Press
key
Trunk Groups Use a trunk group
key to access a
Trunk Group.
On red when active 804
Code:
*
03 + ext.
or department
group
Operation: Press
key
Virtual Extension
Keys
Virtual Extension
Key: Place or an-
swer a call from
your virtual (phan-
tom) extension or
Virtual Extension
Key: Place or an-
swer a call to your
co-worker’s exten-
sion.
Slow Flash red when
ringing, On red when
busy
-
Code:
*
04 + orbit
(01~64)
Operation: Place
or answer call +
Press key
Park Place a call into or
retrieve a call from
a Park Orbit.
Fast Flash when orbit
is busy (green at origi-
nator, red at others)
<Park>
#6
<Pickup>
*
6
ISSUE 2.0 SL1000/SL1100
Features and Specifications Manual 2-23