NEC SL1000 - Page 800

To program a key, press Speaker key, dial 851 (for 2-digit codes) or 852 (for 3-digit codes), press the key
and enter the code (e.g., 48 for Voice Over).
Use this key... For this feature... When you ... Key Lamp Status Also see Srvc
Code
Note
Code: 55
Operation: Do not
Lift the handset +
Press key + Enter
extension number
+ Enter name +
Press Hold
Name Storing Change the name
displayed on your
display telephone.
None 800
Code: 83 + 0~4
Operation: Press
key
Voice Mail Use Voice Mail
Service.
Flashes slowly when
monitoring
-
Code: 77 + exten-
sion or Message
Center number
Operation: Press
key
Call Voice Mail or
leave a message.
Flashes green on your
key for your messages
or flashes red for the
Message Center
*
8 or 8
Code: 78 + Con-
versation Record
Operation: Press
key
Use Conversation
Record.
Flashes red when re-
cording
-
Code: 79 + ext or
pilot number
Operation: Press
key
Voice Mail Use Automated At-
tendant.
On when setup for All
calls.
Slow flash when setup
for Busy/No answer
calls.
-
Code: 80 + ext
number
Operation: Press
key
Tandem Ringing Set up Tandem
Ringing
On for Master Side.
Slow flash for Slave
Side.
744
Code: 81 + trunk
line 001 ~ 126
(SL1000) 001 ~ 76
(SL1100)
Operation: Press
key
Automatic Transfer
to Transfer
Set up Automatic
Transfer to Transfer
Slow Flash when set. 733
Code: 83 + Fuc-
tion code
Operation: Press
key
Voice Mail Select Conversation
Recording Function.
On when set. -
Code: 85 + Direc-
tory Dialing key
Operation: Press
key
Directory Dialing Use Directory Dial-
ing
On when set. 887
Code: 86 + Pri-
vate Call Refuse
key
Operation: Press
key
Private Call Refuse Use Private Call
Refuse
Slow Flash when set. 746
Code: 87 + Caller
ID Refuse key
Operation: Press
key
Caller ID Refuse Use Caller ID Re-
fuse
Slow Flash when set. 748
Code: 88 + table
No. 1 ~ 500 at
PRG 22-17
Operation: Press
key
Dial-In Change Dial-In
Mode
Off: pattern1, pat-
tern5~8
On: pattern2
Slow flash: pattern3
Fast flash: pattern4
709
SL1000/SL1100 ISSUE 2.0
2-22
Codes Tables