Chapter 6 Command Mode
6-3 NWA-033628-001 Rev.1.0
Using Command Mode
Using Command Mode
In Command Mode, command and trace are available.
• Command Page 6-3
• Trace Information Page 6-12
NOTE: Establish a connection link with the SV8300 before executing Command Mode. For information
about the communication link, see “Establishing a Link”. Page 2-12
Command
On the [Command] menu, commands can be entered into the command entry console to invoke or set sys-
tem data.
Performing either of the following procedures will display the [Command] screen in the work window:
• On the command mode submenu, click [Command].
• Click the command shortcut icon on the toolbar.
Continued on next page
No. Item Description
(1) Command entry
console
Enter a command to invoke or set system data. For usage information,
refer “Command Entry”. Page 6-4
(2) Function key labels Display functions or characters assigned to the PC’s function keys.
(3) [Advanced...] button Click to display the [Advanced] screen. For more details, “Command
Screen Preferences”. Page 6-9
(1)
[Command]
menu
(2)
(3)
To Next Page
Loading...
