SECTION 4
SOFTWARE SETUP INFORMATION
6
1
14. Click on the printer icon , to open the "Mail
Print Setup" dialog bo
x.
Make sure the “Printer Driver” is selected as
your "Printer:".
1
5.
From the “Mail Print Setup” window; Click on
the “Adv
anced Settings” button.
The “Printer Driver Properties” window will
open.
Under Media Size select “Env. Com10 4 1/8 x 9
½ in - Portrait”.
Under Orientation select Landscape
Select your other desired choices
Print quality, Copies, etc.
Then Click on OK to close this window.
16. In the “Mail Print Setup” window select “all
pages” or the range of addresses you want to
send to the printer.
17. When ready to print, make sure the printer is
r
eady (ON/OFF button is illuminated), then click
on the "Print" button.
No
te: The Intelligent Mail Barcode (IMB) will
not be displayed or printed unless you have
“cleaned up” the mailing list using the Address
Quality, Address Correction (CASS) feature in
Bulk Mailer. Your Bulk Mailer subscription must
be current for this feature to work.
P
lease contact Satori Software (800-357-3020) or
visit their web site for additional information.
http://www.satorisoftware.com
To Next Page
Loading...
