Manage the WAN and LAN Network Settings
131
N600 and AC750 WiFi DSL Modem Routers
Manage the ADSL Settings
NETGEAR recommends that you use the NETGEAR genie Setup Wizard to detect the DSL
connection and automatically set up the modem router (see Set Up Your Modem Router for
DSL Service on page 18).
If you are technically experienced and are sure of the correct DSL mode, multiplexing
method, virtual circuit number for the virtual path identifier (VPI), virtual channel identifier
(VCI), and A
TM traffic class parameters, you can change those settings.
CAUTION:
Change the DSL mode, multiplexing method, VPI, VCI, and ATM traffic
class parameters only if your ISP gave you this information. If you enter
incorrect settings, the modem router might no longer be able to connect to
your ISP network.
To view or change the ADSL setup:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. T
ype http://www
.routerlogin.net.
A login screen displays.
3. Enter the user name and password for the modem router.
The user name is admin.
The default password is
password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
5. Select xDSL.
To Next Page
Loading...
Need help?
General
