NETGEAR D3600? D6000 - Change the NETGEAR USB Control Center Language; Specify the Time-Out

Share a USB Printer
123
N600 and AC750 WiFi DSL Modem Routers
Change the NETGEAR USB Control Center Language
 To change the language:
1. Click the NETGEAR USB Control Center icon .
The main screen displays.
2. Select Tools > Configuration.
The Control Center - Configuration screen displays.
3. From the Language
menu, select a language.
4. Click the OK button.
The next time NETGEAR USB Control Center starts, the language changes.
Specify the Time-out
 To specify the time-out:
1. Click the NETGEAR USB Control Center icon .
The main screen displays.
2. Select Tools > Configuration.
The Control Center - Configuration screen displays.
3. In the Timeout
field, type the number of minutes.
The time-out is the number of minutes that a computer holds its connection to the printer
when the connection is not being used.
4. Click the OK button.
Y
our settings are saved.