Manage Port Forwarding and Port Triggering
183
N600 and AC750 WiFi DSL Modem Routers
For more information about the settings, see Add a Port Triggering Rule on page 180.
10. Click the Apply button.
Your settings are saved. The changed rule displays in the Port Triggering Portmap Table
on the Port Forwarding / Port Triggering screen.
Remove a Port Triggering Rule
You can remove a port triggering rule that you no longer need.
To remove a port triggering rule:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. T
ype http://www.routerlogin.net.
A login screen displays.
3. Enter the user name and password for the modem router.
The user name is admin
.
The default password is password
. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADVANCED > Advanced Setup > Port Forwarding / Port T
riggering.
The Port Forwarding / Port Triggering screen displays.
6. Select the Port Triggering radio button.
The following figure shows two port triggering rules.
To Next Page
Loading...
