NETGEAR D3600? D6000 User Manual

Supplemental Information
199
N600 and AC750 WiFi DSL Modem Routers
Factory Settings
You can return the modem router to its factory default settings (see Return the Modem
Router to Its Factory Default Settings on page 155). The following table shows the factory
default settings.
Table 4. Factory default settings
Feature Default Behavior
Router Login
User login URL www.routerlogin.com or www.routerlogin.net
User name (case-sensitive) admin
Login password (case-sensitive) password
Remote management Disabled
Internet connection
Physical WAN type of connection ADSL2+
Use of Ethernet port LAN4 WAN LAN
Network Address Translation (NAT) Enabled
WAN MAC address Use default hardware address
Local area network (LAN)
LAN IP address 192.168.1.1
Subnet mask 255.255.255.0
DHCP server Enabled
DHCP range 192.168.1.2 to 192.168.1.254
DHCP start IP address 192.168.1.2
DHCP end IP address 192.168.1.254
UPnP Disabled
Wide area network (WAN)
WAN MTU size 1500
Port scan and DoS protection Enabled
Respond to ping on Internet port Disabled
IGMP proxying Disabled
NAT filtering Open
SIP ALG Enabled

NETGEAR D3600? D6000 Specifications

General

ADSL2+ Support	Yes
Device Type	Modem Router
DSL Modem	Yes
Ethernet Ports	4
USB Ports	1
Security Features	WPA, WPA2, Firewall