Manage the WiFi Network Settings
75
N600 and AC750 WiFi DSL Modem Routers
6. Do one of the following in the Advanced Wireless Settings (2.4GHz b/g/n) section,
Advanced Wireless Settings (5GHz a/n) section, or both sections:
• T
urn off the radio. Clear the Enable Wireless Router Radio check box.
If both radios are disabled, the WiFi LED turns off (see T
op Panel with LEDs on
page 10).
• T
urn on the radio. Select the Enable Wireless Router Radio check box.
If at least one radio is enabled, the WiFi LED lights solid green.
7. Click the Apply button.
Y
our settings are saved.
Manage the WPS Settings
Wi-Fi Protected Setup (WPS) lets you join the WiFi network without typing the WiFi
password. You can change the WPS default settings.
To manage WPS Settings:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. T
ype http://www.routerlogin.net.
A login screen displays.
3. Enter the
modem router user name and password.
The user name is admin.
The default password is password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4. Select ADVANCED > Advanced Setup > W
ireless Settings.
The Advanced Wireless Settings screen displays.
5. Scroll down to the bottom of the screen.
The Router’s PIN field displays the fixed PIN that you use to configure the modem
router’s WiFi settings from another platform through WPS.
6. To disable the PIN, clear the Enable Router’s PIN check box.
To Next Page
Loading...
Need help?
General
