FS728TP Smart Switch Software User Manual
5-81 Configuring the Device Using Your Browser
v2.0, November 2006
– Interface – Specifies the interface for which the table is queried. There are two interface
types from which to select.
– Port – Indicates the Port for which the table is currently queried
– LAG – Indicates the LAG for which the table is currently queried
– MAC Address – Specifies the MAC address for which the table is queried.
– VLAN ID – Specifies the VLAN ID for which the table is queried.
– Address Table Sort Key – Specifies the means by which the Dynamic MAC Address
Table is sorted. The address table can be sorted by address, VLAN, or interface.
– VLAN ID – Shows the ID of the current VLAN.
– MAC – Displays the current MAC address.
– Interface – Indicates the interface for which the table is currently queried
2. Define the fields.
3. Click . The Dynamic Address Aging field is defined and the device is updated.
To query the Dynamic MAC Address Table:
1. Click System > Address Table > Dynamic Addresses. The Dynamic Addresses Page opens:
2. Select a VLAN ID, MAC Address and Interface.
3. Select an Address Table Sort Key.
4. Click . The Dynamic MAC Address Table is queried and the results are displayed.
To Next Page
Loading...
