FS728TP Smart Switch Software User Manual
5-99 Configuring the Device Using Your Browser
v2.0, November 2006
– Authentication – Displays the method used to authenticate users. The possible field
values are:
– MD5 Key – Users are authenticated using the HMAC-MD5 algorithm.
– SHA Key – Users are authenticated using the HMAC-SHA-96 authentication level.
– MD5 Password – The HMAC-MD5-96 password is used for authentication. The user
should enter a password.
– SHA Password – Users are authenticated using the HMAC-SHA-96 authentication
level. The user should enter a password.
– No Authentication – No user authentication is used.
– Delete – Removes users from a specified group. The possible field values are:
– Checked – Removes the selected user.
– Unchecked – Maintains the list of users.
2. Click . The Add Users Page opens:
Figure 5-65
In addition to the fields in the SNMP Users Page, the Add Users Page contains the following
additional fields:
To Next Page
Loading...
