FS728TP Smart Switch Software User Manual
Configuring the Device Using Your Browser 5-134
v2.0, November 2006
– Tx – Defines the port mirroring on transmitting ports.
– Tx and Rx – Defines the port mirroring on both receiving and transmitting ports. This
is the default value.
– Status – Indicates if the port is currently monitored. The possible field values are:
– Active – Indicates the port is currently monitored.
– Ready – Indicates the port is not currently monitored.
– Delete – Removes the port mirroring session. The possible field values are:
– Checked – Removes the selected port mirroring sessions.
– Unchecked – Maintains the port mirroring session.
2. Click . The Add Port Mirroring Page opens:
Figure 5-88
3. Select a port in the Source Port field.
4. Select a port type in the Type field.
5. Click . The port mirroring session is defined and the device is updated.
To edit the port mirroring settings:
To Next Page
Loading...
