FS728TP Smart Switch Software User Manual
5-141 Configuring the Device Using Your Browser
v2.0, November 2006
1. Click Switch > Statistics/RMON > RMON History > History Control. The History Control
Page opens:
Figure 5-92
The History Control Page contains the following fields:
– History Entry No. – Displays the entry number for the History Control Table page.
– Source Interface – Displays the interface from which the history samples were taken. The
possible field values are:
– Port – Specifies the port from which the RMON information was taken.
– LAG – Specifies the LAG from which the RMON information was taken.
– Sampling Interval – Indicates in seconds the time that samples are taken from the ports.
The field range is 1-3600. The default is 1800 seconds (equal to 30 minutes).
– Sampling Requested – Displays the number of samples to be saved. The field range is 1-
65535. The default value is 50.
– Current Number of Samples – Displays the current number of samples taken.
– Owner – Displays the RMON station or user that requested the RMON information. The
field range is 0-20 characters.
To Next Page
Loading...
