EasyManua.ls Logo

NETGEAR ProSafe FS728TP - Page 178

NETGEAR ProSafe FS728TP
196 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FS728TP Smart Switch Software User Manual
5-145 Configuring the Device Using Your Browser
v2.0, November 2006
Received Bytes (Octets) – Displays the number of octets received on the interface since
the device was last refreshed. This number includes bad packets and FCS octets, but
excludes framing bits.
Received PacketsDisplays the number of packets received on the interface since the
device was last refreshed, including bad packets, Multicast packets, and Broadcast
packets.
Broadcast Packets – Displays the number of good Broadcast packets received on the
interface since the device was last refreshed. This number does not include Multicast
packets.
Multicast Packets – Displays the number of good Multicast packets received on the
interface since the device was last refreshed.
CRC Align Errors – Displays the number of CRC and Align errors that have occurred on
the interface since the device was last refreshed.
Undersize Packets – Displays the number of undersized packets (less than 64 octets)
received on the interface since the device was last refreshed.
Oversize Packets – Displays the number of oversized packets (over 1518 octets) received
on the interface since the device was last refreshed.
Fragments – Displays the number of fragments (packets with less than 64 octets,
excluding framing bits, but including FCS octets) received on the interface since the
device was last refreshed.
Jabbers – Displays the total number of received packets that were longer than 1518
octets. This number excludes frame bits, but includes FCS octets that had either a bad
Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS
with a non-integral octet (Alignment Error) number. The field range to detect jabbers is
between 20 ms and 150 ms.
Collisions – Displays the number of collisions received on the interface since the device
was last refreshed.
Utilization – Displays the percentage of the interface utilized.
2. Select an entry in the History Entry No. field. The statistics are displayed.

Table of Contents

Other manuals for NETGEAR ProSafe FS728TP

Related product manuals