FS728TP Smart Switch Software User Manual
Configuring the Device Using Your Browser 5-22
v2.0, November 2006
The Storm Control Page provides fields for configuring broadcast storm control.
To enable storm control:
1. Click Switch > Security > Traffic > Storm Control. The Storm Control Page opens:
Figure 5-21
The Storm Control Page contains the following fields:
– Interface – Displays the port number for which the storm control information is
displayed.
– Broadcast Control – Indicates if forwarding Broadcast packet types is enabled on the
interface for which the storm control information is displayed. The possible field values
are:
– Enable – Enables storm control on all broadcast only ports with threshold of 200 kbps.
Enabled is the default.
– Disable – Disables storm control on the interface.
– Broadcast Mode – Specifies the Broadcast mode currently enabled on the device. The
possible field values are:
To Next Page
Loading...
