FS728TP Smart Switch Software User Manual
5-51 Configuring the Device Using Your Browser
v2.0, November 2006
– Output Power (Watt) – Indicates the Output power in watts.
– Power Limit (Watt) – Indicates the power limits in watts.
– Status – Indicates if the port is enabled to work on PoE. The possible field values are:
– On – Indicates the device is delivering power to the interface.
– Off – Indicates the device is not delivering power to the interface.
– Test Fail – Indicates the powered device test has failed. For example, a port could not
be enabled and cannot be used to deliver power to the powered device.
– Testing – Indicates the powered device is being tested. For example, a powered device
is tested to confirm it is receiving power from the power supply.
– Searching – Indicates that the device is currently searching for a powered device.
Searching is the default PoE operational status.
– Fault – Indicates that the device has detected a fault on the powered device. For
example, the powered device memory could not be read.
To Next Page
Loading...
