114
F.A.Q.
Check all your cables. We recommend looking for damage in both
long and short cables. Next, check if any of the I/O is clipping in
the I/O Settings or if any block is clipping on The Grid.
Excessive CPU usage may also be the cause. Is the CPU meter
above 80% or 90%? If so, you may have overloaded the current
Preset.
I’m hearing audio crackle noise and pops...
Is every physical component working properly? Check your cables,
the connections, and make sure the VOLUME KNOB is raised.
After that, take a look at The Grid. Are the input and output blocks
properly congured? Are other Presets working?
Finally, take a look at the I/O Settings. Maybe some of the GAIN
knobs are all the way down.
My Preset produces no sound at all…
They mean Most Signicant Byte and Least Signicant Byte.
A program change that also selects a bank is composed of three
MIDI messages:
CC#0: Bank Select (MSB)
• Value 0: Preset group 0~127
• Value 1: Preset group 128~256
CC#32: Setlist (LSB)
• PC#: Program Change message 0~127
What do MSB and LSB mean?
Yes. Impulse Responses can be uploaded via Cortex Cloud and
downloaded on your Quad Cortex.
Can I load third party or my own custom
Impulse Responses?
To Next Page
Loading...