Neural DSP Quad Cortex - The Grid; Gestures and Commands

10
Setting up your Quad Cortex
We call the screen where you can add blocks to build a virtual rig
“The Grid”.
The Grid has four rows of eight virtual device block spaces. Almost
all the items on the screen can be controlled by using gestures,
rotary actuators, or dedicated commands.
Gestures and Commands
PRESET
A
UnsavedA1
Out
Multi
1
In
Check the Power Functions
section for more information.
To turn Quad Cortex off, press the capacitive power button
and select You can also remove the power
cable from the back of Quad Cortex.
SHUT DOWN
Main Menu: Touch the upper-right corner of The Grid to access the
Main Menu.
Swipe down from the top of the screen to access the I/O Settings
screen.
Swipe up from the bottom of the screen to access Gig View.
The Grid