Neural DSP Quad Cortex - Expression Bypass

29
Presets
Expression Bypass
The Expression Bypass feature allows
to engage and bypass device blocks
automatically.
First, assign an expression pedal to a device block. Tap a block on
The Grid, tap the contextual menu, then tap “Assign Expression
Pedal”. Select the expression pedal you want to use to control the
block’s parameters.
Use the “ASSIGN” button to assign the expression
pedal to the BYPASS parameter. Use the button
to access its options.
ASSIGNED
BYPASS
BYPASS ON
INVERT RANGE
BYPASS DELAY
• Heel-Toe: Heel down the expression pedal to bypass the device
block. When INVERT RANGE is set to “On” the block can be
bypassed at Toe position.
• Switch: Pressing the toe-switch of the expression pedal will
bypass the device block.
• Stop: Keeping the expression pedal still will bypass the device
block
(Heel-Toe and Switch modes)
• ON/OFF SWITCH: Reverses the value where the bypass is
engaged.
(Heel-Toe and Switch modes)
• TIME KNOB: Sets the time it takes for the device block to be
bypassed (Up to 5000ms).
LATCH EMULATION
(Switch mode)
• ON/OFF SWITCH: Modies momentary toe-switches behavior
to emulate latching response.