Neural DSP Quad Cortex - PC TYPE; Incoming MIDI; Receiving MIDI Program Change messages (PC)

90
MIDI
• CHANNEL: Choose from 1 to 16 to select the channel that will
send the MIDI commands.
• BANK CC#0: 0 - 127. Determines the MSB.
• BANK CC#32: 0 - 127. Determines the LSB.
• PROGRAM#: Choose from 0 to 127 to select the PC number.
PC TYPE
Tap Done to close the Preset MIDI Out Settings window.
Done
1/2
Out
1
In
SCENE
A
A4 MIDI
1/2
Out
1
In
STOMP
A
A4 MIDI
Note the footswitch and expression pedal MIDI commands
can only be sent in SCENE or STOMP Modes. The outgoing
MIDI commands will be deactivated in PRESET Mode.
However, any outgoing “ON PRESET LOAD” MIDI messages
will be sent in PRESET mode.
Incoming MIDI
Quad Cortex can receive CC and PC messages via MIDI DIN or
USB. You can use external devices to change Presets and for other
features.
Incoming MIDI Program Change messages change Presets and
Setlists on Quad Cortex.
• We use CC#32 for changing Setlists, supporting up to 128
Setlists (value 0-127).
• CC#0 is used for splitting up the Setlists in to groups of 128
Presets. CC#0 value 0 is used for Presets 0-127 and CC#0
value 1 is used for Presets 128-256.
Receiving MIDI Program Change messages (PC)