Neural DSP Quad Cortex - Receiving MIDI Continuous Controller messages (CC)

91
MIDI
CC messages can be used for the following purposes:
• Change Mode.
• Change Scene.
• Tap Tempo BPM.
• Enable/bypass footswitches A-H.
• Open/Close Gig View.
• Open/Close the Tuner.
Receiving MIDI Continuous Controller messages (CC)
If you want to load theQuad Cortex Preset 68 (9D)inSetlist 9,
then you would send the followingPC messageto the unit:
• CC#0 value 0, CC#32 value 9, Program #67
Example #2
Important: The last CC#0 value # is remembered until you change
the CC#0 value again and choose to load a Preset from a different
Preset group.
If you want to load theQuad Cortex Preset 129 (17A)inSetlist 5,
then you would send the followingPC messageto the unit:
• CC#0 value 1, CC#32 value 5, Program #1
Example #1