51
Modes
Stomp Mode allows you to assign any block in a rig to a footswitch,
just like you would with an analog pedalboard.
In Stomp Mode, blocks get automatically assigned to footswitches
in the order they are added to The Grid.
Multiple devices can be assigned to one footswitch. There is no
limit to the number of devices’ bypass status that can be assigned
to a single footswitch.
Tap to allocate the block to a different footswitch.
Tap to assign an unnasigned block to a footswitch.
Tap to unassign the block from its current footswitch.
Stomp Mode
To Next Page
Loading...