46
Presets
Common FX Parameters
PARAMETER DESCRIPTION
GAIN
Controls the gain value of the selected device.
DRIVE / OVERDRIVE
Controls the drive value of the selected device.
TONE
Controls the treble frequencies. This parameter can let all the treble
frequencies through or cuts a large amount of treble and some high mids.
VOLUME
Sets the overall volume of the selected device.
COMP
The amount of gain reduction is determined by this parameter.
THRESHOLD
Sets the level at which the main parameter operates.
RATE Adjusts the rate of the effect, with higher settings providing faster rates.
DEPTH Sets the intensity of the modulation.
SYNC
Allows you to sync effects to the current Quad Cortex Tempo. The Sync Note
value is constrained by the Tempo and the Speed parameter range.
FEEDBACK / MIX /
BLEND
Adjusts the amount of delayed signal fed back into the effect. The higher the
settings, the wetter the signal is.
DECAY Determines the length of time the effect sustains.
PRE DELAY Sets the time before the effect is heard.
HIGH / LOW PASS Controls the frequency range of the high and low pass lters.
TRAILS SWITCH
Trails Off: Any delay or reverb effect is instantly muted when the block is
bypassed. Trails On: Any delay or reverb effect decay naturally when the
block is bypassed.
BYPASS This button bypasses the block entirely.
To Next Page
Loading...