Neural DSP Quad Cortex - Looper X MIDI Reserved CC List

93
MIDI
CC #48 Value 64-127 Open / Close Looper UI (Always opens in perform mode)
CC #49 Value 64-127 Duplicate/Stop Duplicate
CC #50 Value 64-127 Enable/disable One Shot
CC #51 Value 64-127 Enable/Disable Half Speed
CC #52 Value 0-127
Punch Feature.
• Value 0-63 = Punch Out
• Value 64-127 = Punch In/Punch Out
*Value 0-63 works as long as the parameter is set to momentary and value
0-63 is sent on MIDI controller footswitch release.
CC #53
Record/Stop.
• Value 0-63 = Stop recording
• Value 64-127 = Record/Overdub/Stop
*Value 0-63 works as long as the parameter is set to momentary and value
0-63 is sent on MIDI controller footswitch release.
CC #54 Value 64-127 Play/Stop
CC #55 Value 64-127 Enable/Disable Reverse
CC #56 Value 64-127 Undo/Redo
CC #57 Value 0-1
Duplicate Mode parameter
• Value 0 = Free
• Value 1 = Sync
CC #58 Value 0-9
Quantize parameter
• Value 0 = OFF
• Value 1-8 = 1-8 Beats
• Value 9 = 16 Beats
CC #59 Value 0-1
MIDI Clock Start
• Value 0 = OFF
• Value 1 = ON
CC #60 Value 0-1
Perform / Params mode
• Value 0 = Perform Mode
• Value 1 = Params Mode
CC #61 Value 0-13
Routing Mode parameter
Value 0-13 = Grid > I/Os > Multi Out
Looper X MIDI Reserved CC List
The Looper X has reserved specic MIDI CC messages for its
functions.