During operation, your principal contact with the NewTek 3Play™
system will normally be though the use of the control surface.
Using its buttons and other controls, you can perform the great
majority of necessary functions.
This chapter describes the features of the control surface. Further
references to the control surface are made in context In
subsequent chapters, as well.
8.1 OVERVIEW
The NewTek 3Play™ control surface is
specifically designed to provide all of the
commonly used production functions of
the system, without unnecessary
complexity.
This apparent simplicity is very
deliberate, and makes using your
NewTek 3Play™ straight forward and
trouble free.
In the sections that follow, we’ll review
the controls in each group on the
control surface.
To Next Page
Loading...
