Page | 116
This brings us back to the A + B Output Mode. You may wonder what effect different controls
will have in this special ‘tandem mode’, and what will be displayed on the Replay Desktop.
11.2.1 CONTROL AND A+B MODE
In broad terms, the special A + B mode causes transport control operations (Play, Stop, etc.) to
occur in tandem, while other operations – such as changes to Control Mode, clip selections, and
the like – apply exclusively to the dominant (or visible) output.
For example, when A is lit along with A + B on the control surface or Replay Desktop:
The Replay Desktop displays the operational state for Output A.
Pressing Stop or Play affects the sources on both *outputs.
Selecting a different clip (or Clips List /Play List page) affects the visible output only – in
this example, Output A.
* For Live video sources, transport control operations are invalid when Record is disabled,
and will have no effect.
To Next Page
Loading...
