Nibe FIGHTER 1250 - General; Key Lock; Quick Movement

40
NIBE FIGHTER 1250
Quick movement
To quickly return to the main menu from sub-menus press
the following:
1. Operating mode button
2. The Enter button
Key lock
A key lock can be activated in the main menus
by simultaneously pressing the plus and the mi-
nus buttons. The key symbol will then be shown
on the display.
The same procedure is used to deactivate the key lock.
E
General
A BI II III I II
5 0 . 0 C
Va r m v a t t e n t e m p e r a t u r
13.43
1.0
P
The menu tree shows all the menus. Changing of menu
type is done from menu 8.1.1
When the menu number ends with a zero this indicates
there is a submenu.
Three different menu types can be selected.
[N] Normal, covers the normal user's needs.
[E] Extended, shows all menus except the service menus.
[S] Service, shows all menus, returns to the previous
menu level 30 minutes after the last button was
pressed.
The display screen shows information about the status of the
heat pump. Menu 1.0 is normally shown on the display. The
plus and minus buttons and the enter button are used to
scroll through the menu system as well as to change the set
value in some menus.
The Plus button is used to move for-
ward to the next menu on the current
menu level and to increase the value of
the parameter in menus where this is
possible.
The Minus button is used to move
back to the previous menu on the cur-
rent menu level and to decrease value
of the parameter in menus where this is
possible.
The Enter button is used to select sub-
menus of the current menu, to permit
parameters to be changed and to con-
fi rm any changes to parameters.
Menu number Menu nameKey lock
Clock
Symbols
Value of the current
parameter
Ensure the operating mode is not changed
during quick movement
Control
Note!