Nibe FIGHTER 1250 - General Information about the Heat Pump; Product Information; What the Heat Pump Can Do

4
NIBE FIGHTER 1250
Product information
NIBE FIGHTER 1250 is a complete modern heat pump that
offers effective technical energy saving and reduced carbon
dioxide emissions. Heat production is safe and economical
with integrated hot water heater, immersion heater, circu-
lation pumps and control system.
Heat is obtained via a closed system where water mixed
with antifreeze circulates in a hose out to the heat source
(rock/ground/lake). As the temperature in the ground
remains relatively constant throughout the year, the heat
pump can effi ciently recover the renewable “solar energy”
that is stored there.
Features of NIBE FIGHTER 1250 :
Optimal annual heating factor thanks to the inverter
controlled compressor.
Inverter controlled brine pump that supplies the heat
pump with suitable brine fl ow.
Minimal operating costs, no expensive peaks when it is
cold outside. The compressor adapts as necessary.
Integrated hot water heater.
High temperature range
– Flow line temperature 65 °C
– Return line temperature 56 °C.
Integrated clock for scheduling extra hot water and
temperature lowering/increasing the fl ow line tempera-
ture.
Prepared for pool heating.
Prepared for control of two heating systems.
What the heat pump can do
NIBE FIGHTER 1250 is part of a new generation of heat
pumps that can supply your house with cheap and envi-
ronmentally friendly heat via an effi cient inverter control-
led compressor. The heated water circulates around the
house’s heating unit and heats the water in the 160 litre
hot water heater, which is insulated with EPS (environmen-
tally friendly cellular plastic) for minimal heat loss.
The heat pump can be connected to an optional low tem-
perature distribution system. e.g. radiators, convectors or
under fl oor heating. It is also prepared for connection to
several different products and accessories, e.g. extra hot
water heater, ventilation recovery, pool, free cooling and
heating systems with different temperatures.
An 8 kW immersion heater connects automatically as re-
serve operation if something unexpected should occur.
FIGHTER 1250 is equipped with a control computer for
many options, e.g. good comfort, good economy and safe
operation. Clear information about status, operation time
and all temperatures in the heat pump are shown on the
backlit front panel. This means, for example, that external
unit thermometers are not necessary.
General information about the heat pump
A
General information about the heat pump