Nibe FIGHTER 1250 - Menu Tree

42
NIBE FIGHTER 1250
Control
E
Menu mode: [N] Normal, [E] Extended, [S] Service
1.0 Hot water temp.
[N]
2.0 Flow temperature
Hot water heating
[N]
1.1 Time period HW/Total [N] 2.1 Curve coeffi cient [N]
Time Heating/Set. 2.2 Offset heating curve [N]
Time HW/Set. 2.3 Flow temp./MIN [E]
1.2 Time period [N] 2.4 Flow temp./MAX [E]
1.3 MAX-time HW-period [N] 2.5 External adjustment [E]
1.4 HW-temp/Starttemp.HW [N] 2.6.0 Own curve defi nition [E]
Start temp.HW 2.6.1 Flow temp.at +20 [E]
1.5 HW-temp/Stop temp.HW [N] 2.6.2 Flow temp.at -20 [E]
Stop temp.HW 2.6.3 Set temperature [E]
1.6 Stop temp XHW [E] 2.6.4 Flow temp at set [E]
1.7 Stop compressor XHW [E] 2.6.5 Return to 2.6.0 [E]
1.8 Interval XHW [E] 2.7 Circ-pump cont.heat [E]
1.9 Next XHW action [E] 2.8 Heat in-/out- temp. [E]
1.10 HW running time [E] 2.9 Degree minutes [E]
1.11.0 HW production cont. [E] 2.10 Return to 2.0 [N]
1.11.1 CompFreq HW1 [E]
1.11.2 CompFreq HW2 [E]
1.11.3 Shift-temp HW1-HW2 [E]
1.11.4 Circ-pump cont. HW1 [E]
1.11.5 Circ-pump cont. HW2 [E]
1.11.6 Return to 1.11.0 [E]
1.12
Return to 1.0 [N]