Nibe FIGHTER 1250 - Page 46

44
NIBE FIGHTER 1250
** Only shown when the accessory RG 10 is installed.
Menu mode: [N] Normal, [E] Extended, [S] Service
Control
E
5.0 Brine in-/out- temp
[N] 6.0** Room temp./Settings [N]
5.1 Status compressor [N] 6.1 Room compensation [E]
Time to start 6.2 Heating system [E]
5.2 Number of starts [N] 6.3 Set room temp. [N]
5.3 Comp. acc. run time [N] 6.4 Room temp avg 1min [E]
5.4 Time between starts [E] 6.5 Return to 6.0 [N]
5.5 Compr. starts at [E]
5.6 Max returnt. act/set [E]
5.7 Hot gas temp. [E]
5.8 Liquid line temp. [E]
5.9 Bulb temperature [E]
5.10 Cond out temp./Max [E]
5.11.0 Brine diff set/pro [E]
5.11.1 Brine-pump status [E]
5.11.2 Brine-pump cont.sign [E]
5.11.3 Brine-pump man Cont [E]
5.11.4 BrineDiffAt min freq [S]
5.11.5 BrineDiffAt max freq [S]
5.11.6 BrineDiff regP [S]
5.11.7 BrineAdvanceRegP [S]
5.11.8 BrineDiffregKstepval [S]
5.11.9 Brine ret. temp./Min [E]
5.11.10 Autoreset brinealarm [E]
5.11.11 Return to 5.11.0 [E]
5.12.0 Compressor freq [E]
5.12.1 Inverter temperature [E]
5.12.2 Power in W [E]
5.12.3 Comp phase current [E]
5.12.4 VDC link [E]
5.12.5 Comp load I2T [E]
5.12.6 Comp energy [E]
5.12.7 Return to 5.12.0 [E]
5.13 Return to 5.0 [N]