130
Z
To choose a metering option, press the Y button and rotate the
main command dial until the desired setting is displayed in the
viewfinder and top control panel.
A Non-CPU Lens Data
Specifying the focal length and maximum aperture of non-CPU lenses
using the Non-CPU lens data option in the setup menu (0 241) allows
the camera to use color matrix metering when matrix is selected and
improves the accuracy of center-weighted and spot metering.
Center-
weighted metering will be used if highlight-weighted metering is
selected with non-CPU lenses or if matrix metering is selected with non-
CPU lenses for which lens data have not been supplied.
Note that
center-weighted metering may also be used if highlight-weighted
metering is selected with certain CPU lenses (AI-P NIKKOR lenses and AF
lenses that are not of type G, E, or D; 0 411).
A See Also
See Custom Setting b5 (Matrix metering, 0 333) for information on
choosing whether matrix metering uses face detection.
For information
on making separate adjustments to optimal exposure for each metering
method, see Custom Setting b7 (Fine-tune optimal exposure, 0 333).
Y button Main command dial
Top control panel
Viewfinder
To Next Page
Loading...
