Nikon D5 - E5: Modeling Flash; E6: Auto Bracketing (Mode M); E7: Bracketing Order

343
U
If On is selected when the camera is used with an optional flash
unit that supports the Nikon Creative Lighting system (0 420), a
modeling flash will be emitted when the camera Pv button is
pressed (0 132).
No modeling flash is emitted if Off is selected.
This option determines which settings are affected when AE &
flash or AE only is selected for the Auto bracketing set option in
the photo shooting menu in manual exposure mode.
Flash bracketing is performed only with i-TTL or qA (auto
aperture) flash control.
If a setting other than Flash only is
selected and the flash is not used, ISO sensitivity will be fixed at the
value for the first shot when auto ISO sensitivity control is on
(0 126).
At the default setting of MTR > under > over (H), exposure, flash,
and white balance bracketing are performed in the order
described on pages 148 and 152.
If Under > MTR > over (I) is
selected, shooting will proceed in order from the lowest to the
highest value.
This setting has no effect on ADL bracketing.
e5: Modeling Flash
G button ➜ A Custom Settings menu
e6: Auto Bracketing (Mode M)
G button ➜ A Custom Settings menu
Option Description
F
Flash/speed
Camera varies shutter speed (AE only) or shutter
speed and flash level (AE & flash).
G
Flash/speed/
aperture
Camera varies shutter speed and aperture (AE
only) or shutter speed, aperture, and flash level
(AE & flash).
H
Flash/aperture
Camera varies aperture (AE only) or aperture and
flash level (AE & flash).
I
Flash only Camera varies flash level only (AE & flash).
e7: Bracketing Order
G button ➜ A Custom Settings menu