205
l
Setup
This section details the steps involved in setting up a WR-R10 or a
master flash mounted on the camera accessory shoe (C) and
remote flash units (f) for wireless flash photography.
More
information on using optional flash units can be found in the
documentation provided with the devices.
❚❚ Optical AWL
The following instructions assume that the master flash is an
SB-5000 or SB-500. When an SB-910, SB-900, SB-800, SB-700, or
SU-800 is used as a master flash, settings must be adjusted using
the controls on the individual flash units; see the flash unit
manuals for details.
1 C: Connect the master flash.
Mount an SB-5000 or SB-500 on the camera accessory shoe.
2 C: Enable optical AWL.
In the photo shooting menu, select Optical AWL for Flash
control> Wireless flash options.
You can now take photos as described on page 209.
To Next Page
Loading...
