209
l
Taking Photos
The Flash control> Remote flash control item in the photo
shooting menu offers three options for remote flash photography:
Group flash, Quick wireless control, and Remote repeating.
❚❚ Group Flash
Select this option to adjust settings separately for each group.
1 C: Select Group flash options.
Highlight Group flash options in the
flash control display and press 2.
2 C: Choose the flash control mode.
Choose the flash control mode and flash
level for the master flash and the flash
units in each group:
• TTL: i-TTL flash control (0 196).
• qA: Auto aperture (available only with
compatible flash units).
• M: Choose the flash level manually.
• – – (off): The units do not fire and the flash level can not be
adjusted.
If Optical AWL or Optical/radio AWL is
selected for Flash control> Wireless
flash options in the photo shooting
menu (0 307), choose a channel for the
master flash. If the remote flash units
include an SB-500, you must choose
channel 3, but otherwise you can choose any channel
between 1 and 4.
To Next Page
Loading...
