336
U
Choose the maximum frame advance rate for CH (continuous high-
speed) and C
L (continuous low-speed) modes.
For more
information on frame rate, see page 117.
The maximum number of shots that can be taken in a single burst
in continuous mode can be set to any value between 1 and 200.
Note that regardless of the option selected, there is no limit to the
number of photos that can be taken in a single burst when a
shutter speed of 4 s or slower is selected in exposure mode S or M.
d: Shooting/Display
d1: Continuous Shooting Speed
G button ➜ A Custom Settings menu
Option Description
Continuous
high-speed
Choose the frame advance rate for CH (continuous high-
speed) mode from 10, 11, or 12 fps or 14 fps (mirror up).
Continuous
low-speed
Choose the frame advance rate for CL (continuous low-
speed) mode from values between 1 and 10 fps.
d2: Max.
Continuous Release
G button ➜ A Custom Settings menu
A The Memory Buffer
Regardless of the option selected for Custom Setting d2, shooting will
slow when the memory buffer fills (tAA).
See page 473 for more
information on the capacity of the memory buffer.