139
Z
2 Select exposure mode M.
Press the I button and rotate the main command dial until
M is displayed in the top control panel.
3 Choose a shutter speed.
While the exposure meters are on, rotate
the main command dial to choose a
shutter speed of Bulb (A) or Time
(%).
The exposure indicators do not
appear when Bulb (A) or Time (%) is
selected.
4 Open the shutter.
Bulb: After focusing, press the shutter-release button on the
camera or optional remote cord or wireless remote controller
all the way down.
Keep the shutter-release button pressed
until the exposure is complete.
Time: Press the shutter-release button all the way down.
5 Close the shutter.
Bulb: Take your finger off the shutter-release button.
Time: Press the shutter-release button all the way down.
I button Main command dial Top control panel
To Next Page
Loading...
