Nikon D5 - Page 427

403
U
1 Select Image overlay.
Highlight Image overlay in the retouch
menu and press 2.
The dialog shown at
right will be displayed, with Image 1
highlighted; press J to display a picture
selection dialog listing only large NEF
(RAW) images created with this camera (small and medium
NEF/RAW images can not be selected).
2 Select the first image.
Use the multi selector to highlight the
first photograph in the overlay.
To view
the highlighted photograph full frame,
press and hold the X button.
To view
images in other locations, press W (M)
and select the desired card and folder as described on page
247.
Press J to select the highlighted photograph and return
to the preview display.
3 Select the second image.
The selected image will appear as Image 1. Highlight Image 2
and press J, then select the second photo as described in
Step 2.
4 Adjust gain.
Highlight Image 1 or Image 2 and
optimize exposure for the overlay by
pressing 1 or 3 to select the gain from
values between 0.1 and 2.0.
Repeat for
the second image.
The default value is
1.0; select 0.5 to halve gain or 2.0 to double it.
The effects of
gain are visible in the Preview column.