58
x
D Shooting in Live View
To prevent light entering via the viewfinder from interfering with
photographs or exposure, close the viewfinder eyepiece shutter
(0 120).
Although they will not appear in the final picture unless On is selected
for Silent photography (0 54), jagged edges, color fringing, moiré,
and bright spots may appear in the monitor, while bright bands may
appear in some areas with flashing signs and other intermittent light
sources or if the subject is briefly illuminated by a strobe or other bright,
momentary light source.
In addition, distortion may occur if the camera
is panned horizontally or an object moves at high speed through the
frame.
Flicker and banding visible in the monitor under fluorescent,
mercury vapor, or sodium lamps can be reduced using the Flicker
reduction option in the movie shooting menu (0 320), although they
may still be visible in the final photograph at some shutter speeds.
When shooting in live view, avoid pointing the camera at the sun or
other strong light sources.
Failure to observe this precaution could
result in damage to the camera’s internal circuitry.
Regardless of the option selected for Custom Setting c2 (Standby
timer, 0 334), the standby timer will not expire during shooting.
To Next Page
Loading...
