EasyManuals Logo

Nilfisk-Advance Condor XL User Manual

Nilfisk-Advance Condor XL
102 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #67 background imageLoading...
Page #67 background image
FORM NO. 56043124 - Condor XL
- 67
ENGINE SYSTEM
ENGINE SPECIFICATIONS
1.6 liter GM
Engine type
Vertical, liquid Cooled, 4 Cylinder, Single Overhead cam
Distributor-less
Displacement 98 Cubic inches (1600 cc)
Fuel
Gasoline
87 Octane Unleaded Gasoline with no more than
10% Ethanol by volume
LP 33-lb. Tank Size (liquid withdrawal system)
Spark Plugs AC Delco p/n 93206675, Gap .032 -.035 (.8 mm-.9 mm)
Spark Plug Wiring
Match numbered coil position to spark plug
number (front to rear 1, 2, 3 and 4)
Engine Firing Order 1-3-4-2
Ignition Timing Fixed (controlled by engine ECM)
Engine Rotation CCW ( ywheel end)
Valve lifters Hydraulic
Oil Capacity 3.7 qt. (3.5L) with Oil Filter
Oil Pressure 21 psi (minimum with engine hot at idle)
Cooling System 3.5 qt. (Engine Only)
Kubota V1505-B-1
Engine Type Vertical, liquid cooled, 4 cylinder, 4-cycle diesel engine
Displacement 91.41 cubic inches (1498cc)
Fuel Diesel fuel No. 2-D (ASTM D975)
Injection Pump Bosch MD type mini pump
Engine ring order 1-3-4-2
Injection Timing
(before TDC)
19 degrees
Oil Capacity 5.5 qt. (5.2L) / Oil Pan depth 4.9” (12.4 cm)
Cooling Capacity 8 qt. (7.5L)
Horsepower 46 gross @2800 RPM,41 Int @2400 RPM
Idle Speeds Low idle 1300 RPM, High idle 2400 RPM
Note: Refer to the engine manufacturers Operator and Service manuals for more detailed engine speci cations and service data.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nilfisk-Advance Condor XL and is the answer not in the manual?

Nilfisk-Advance Condor XL Specifications

General IconGeneral
BrandNilfisk-Advance
ModelCondor XL
CategoryFloor Machine
LanguageEnglish

Related product manuals