System Management
536
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
© 2021 Nokia.
Use subject to Terms available at: www.nokia.com
3HE 17358 AAAB TQZZA
Some platforms include the value def. If the user specifies def, the software allocates
the default amount of resources based on the 7210 SAS platform. On the
7210 SAS-R6 and 7210 SAS-R12, the amount of default resources allocated also
varies based on the IMM plugged into the slot.
Values Table 50 lists the parameter values and the values used for the def
keyword on different 7210 SAS platforms and on different IMM
types.
Note:
1. The maximum value is 9 if qos-network-ingress-resource is configured as 0.
ipv4-ipv6-128-match-enable
Syntax [no] ipv4-ipv6-128-match-enable
Context configure>system>resource-profile>ingress-internal-tcam>acl-sap-ingress
Table 50 Number of Resources Available for ACL-SAP-Ingress
Platforms Min value
(per node)
Max value
(per node)
Default
Values
7210 SAS-M (per node) 0 5 5
7210 SAS-T access-uplink mode (per
node)
073
7210 SAS-T network mode (per node) 0 6 3
7210 SAS-R6 (per IMMv1) 0 10 2
7210 SAS-R6 and 7210 SAS-R12 (per
IMMv2)
0103
7210 SAS-R6 and 7210 SAS-R12 (per
IMM-c)
0
8
1
3
7210 SAS-Mxp (per node) 0 10 3
7210 SAS-Sx 1/10GE (per node)
(standalone)
063
7210 SAS-Sx 1/10GE (standalone-VC) 0 5 2
7210 SAS-S 1/10GE (per node)
(standalone)
063
7210 SAS-S 1/10GE (standalone-VC) 0 5 2
7210 SAS-Sx 10/100GE (per node) 0 4 1